Garden Ladybug Beetle
$2.00$1.00
In a small orchard, gardeners used to watch for the first ladybug of spring. When it landed on a leaf, they took it as a quiet sign that the season was turning in the right direction. Some even kept a tiny carving of the beetle near seed jars, hoping it would bring steady growth and fewer pests. This model is made in that spirit, as a simple nature charm you can print and keep on a shelf, desk, or diorama.
This 3D model depicts a realistic ladybug with a smooth domed shell, clear wing-case seam, and distinct black spots. The head and thorax have subtle surface texture, and the legs are sculpted with visible joints and a grounded stance. The body shape reads well from top view and front view, which makes it suitable for display, educational collections, tabletop scenery, or nature-themed décor.
This model is based on an original concept and design. The initial 3D form was generated with the assistance of AI tools, after which it was extensively refined and manually detailed in Blender and other 3D editing software. This workflow ensures the figure maintains its unique character and meets the standards of precision, structure, and print-readiness required for high-quality 3D printing.
Please note that the model is primarily designed for textured versions (OBJ + MTL in ZIP archive), allowing for a rich and visually detailed result when used with color-supported 3D printing or digital rendering. The non-textured version (STL, 3MF) may lack some surface details visible in the textured formats.
Recommended print settings (resin)
Layer height: 0.03–0.05 mm
Supports: light supports under legs and under the body edge
Orientation: slight angle to reduce peel forces on the shell
Material: standard resin or tough resin for stronger legs
Recommended print settings (FDM)
Layer height: 0.12–0.16 mm, 0.4 mm nozzle
Supports: supports under legs if printed as one piece
Material: PLA or PETG
Adhesion: brim suggested for small contact areas
Supports and assembly
Supports are recommended due to the thin legs and undercuts.
Print as a single piece for easiest display use.
If you scale down heavily, consider thicker support settings to protect the legs.
Clean-up focus areas: leg tips and underside of the shell rim.
Recommended size, time, material
Recommended size: 50–70 mm body length for a clear, sturdy print
Minimum print time to plan for: 180 minutes
Resin material estimate at ~60 mm: 20–35 g (varies with hollowing and supports)
Filament material estimate at ~60 mm: 12–25 g (varies with infill and supports)
Scaling Note: This model is designed in millimeters (mm). If it appears too small when imported into your slicer, ensure your software is set to mm units. If needed, scale the model up 100x if the slicer defaults to meters instead.